Kenwood DNN991HD - Manual (Page 12)

11
Return to the Top page
Basic Operations
Number Name Motion
1
s (Reset) • If the unit or the connected unit fails to operate properly, the unit
returns to initial settings when this button is pressed (P.157) .
• If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (P.132) .
2
S, R (Vol) Adjusts volume.
3 Remote
Sensor Receives the remote control signal.
4 NAV • Displays the navigation screen.
• Pressing for 1 second switches camera view display on/off.*
5 MENU • Displays the option menu screen.
• Pressing for 1 second switches AV out sources.
6 HOME • Displays the Home screen (P.20) .
• Pressing for 1 second turns the power off.
• When the power off, turns the power on.
7
6 (Back) • Return to the previously viewed screen.
• Pressing for 1 second displays the Hands Free screen
(P.122) .
8
G (Eject) • Ejects the disc.
• When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
• When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
9
Disc insert
slot A slot to insert a disc media.
10 SD card slot • DNN991HD: A slot to insert an SD card.
• DNN9710BT: An SD card slot for upgrading the map. For how to upgrade
the map, refer to the instruction manual of the navigation system.
* The function of the [NAV] button can be changed to the display off function. See User interface
(P.131) .