Kenwood KDC-U7056BT - Manual (Page 32)

64 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 65
13-5. Bluetooth device registration
test
You can check whether a Bluetooth device can be
registered by operating this unit.
1 Press [ Ú].
“BT MODE” appears and enter the Bluetooth mode.
2 Select “BT Test Mode” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
3 Start registering a unit by operating the
Bluetooth device.
“Please paring your phone” appears.
Operate the Bluetooth device to request this unit
for connection.
The name of this unit (“KDC-####”) is displayed on
the Bluetooth device.
Some Bluetooth device requests you to enter a PIN
code. The PIN code is set to “0000” as default.
4 Press [Control] knob.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis (“OK”: Enabled;
“NG”: Disabled).
Display Description
“Pairing” Registration in this unit
“HF Connect” Hands-free phoning
“AUD Connect” Audio playback
“PB Download” Phone Book downloading
5 Press [Control] knob.
Exits the test mode.
Registering a Bluetooth