Kenwood KDC-U7056BT - Manual (Page 23)

46 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 47
10. Listen to the Digital Radio (KDC-U7056DAB)
10-3. Recall preset service
Recall the service in the memory.
1 Press [ 1/6] twice.
Enter the Preset memory mode.
2 Turn [Control] knob to select a memory
number (“1” – “18”).
3 Press [Control] knob.
10-4. Service list select
You can select the component you would like to
listen to from the service list.
1 Press [ 1/6].
The service list is displayed in the alphabetical
order.
2 Turn [Control] knob to select a service, and
then press [Control] knob.
10-1. Listening to the Digital Radio
Selecting a tuner source
Press [SRC] to select a Digital Radio (“DIGITAL
RADIO”) source.
Refer to
(page 10) .
Searching an ensemble
Press and hold [ E] or [F].
Searching an ensemble, service, and
component
Press [ E] or [F].
T: Press [E]
U: Press [F]
Ens.: ensemble
Serv.: service
Compo.: component
The seek mode can be changed. Refer to
(refer to below),
<10-
9. Digital Radio setting> (page 50) .
Selecting a Seek mode
Press [ S].
Display Operation
“Auto1”
Press: Select an ensemble, service, and component.
Press and hold: Automatic search for an ensemble.
“Auto2” Search in order of the service in the preset memory.
“Manual” Press: Select an ensemble, service, and component.
Press and hold: Manually search for an ensemble.
Updating Service List information
Press and hold [ R].
10-2. Service preset memory
You can store a ensemble, service, and component
in the memory.
1 Press [ E] or [F] to select the ensemble,
service, and component.
2 Press [ 1/6] twice.
Enter the Preset memory mode.
3 Turn [Control] knob to select a memory
number (“1” – “18”).
4 Press and hold [Control] knob.
Exiting the Preset memory mode
Press and hold [ 1/6].
About the Mix Station preset mode
• If you press [ 1/6] three times in step 2, the Mix Station
preset mode is selected with “Mixed Preset List” displayed.
In this mode, different bands and tuner sources (FM,
AM, Digital Radio etc.) can be saved in the same preset
layer, which allows you to recall a desired station without
switching between bands and/or tuner sources. Maximum
of 6 stations can be preset in the Mix Station preset mode.
Once the Mix Station preset mode is set, you can enter the
same mode by just pressing [
1/6] once in step 2.
Pressing [ 1/6] twice allows you to return to the normal
Station preset mode.