Kenwood KDC-U7056BT - Manual (Page 26)

52 | KDC-U7056DAB/ KDC-U7056BT/ KDC-U7056BTL English | 53
11. Display settings
11-1. Selecting a display type
Shown below are examples of display types.
1 Press [Control] knob.
Enters the Function setting mode.
2 Select “DISP&ILLUMI” > “Display Select” >
“Type Select” using [Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
3 Select a Display type using [Control] knob.
Display type Display information
Type A
Displays 3 lines of text.
Type B Displays 2 line of text.
Type C Displays the clock.
Type D Displays the Spectrum analysis.
Type E [1] Displays the Dynamic Label of Digital Radio.
Type F Turn off the display and key illumination. (5 seconds
after completion of operation)
[1] Function of KDC-U7056DAB. Selectable only when in
the Digital Radio source.
Exiting from the Function setting mode
Press and hold [ 1/6].
11-2. Information display setting
You can set the side and graphic parts of the
display.
1 Press [Control] knob.
Enters the Function setting mode.
2 Select “DISP&ILLUMI” > “Display Select” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
3 Select a display setting item using [Control]
knob.
Display Description
“Side Select” Sets the side part display for Type A, B, and D.
1 / 2 / 3 (Type A, B only)
“Graphic Select” Sets the Type D Spectrum analysis display.
1 / 2
“Status” Sets the status display (ON/OFF indicator for
each function) for Type A and B. [1]
“ON” / “ OFF ”
( Colored text : Factory setting)
[1] The status display automatically turns “OFF” during aha
source and cannot be switched to ON.
4 Select a setting using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [ 1/6].
11-3. Illumination color selection
You can select the illumination color of the panel.
1 Press [Control] knob.
Enters the Function setting mode.
2 Select “DISP&ILLUMI” > “Color Select” using
[Control] knob.
For how to use [Control] knob, refer to
<3-3. How
to select the item> (page 9) .
3 Select a illumination part using [Control]
knob.
Display Part
“Color SEL All” All
“Color SEL Display” Display
“Color SEL Key” Button
4 Select a color (“Variable Scan”/ “Color1” —
“Color24”/ “User”) using [Control] knob.
Exiting from the Function setting mode
Press and hold [ 1/6].
11-4. Adjusting the Illumination
color
You can adjust the illumination color of the panel.
1 Select the illumination color you want to
adjust.
Select from among “Color1” to “Color24” or
“User” with reference to
<11-3. Illumination color
selection> (page 53) .
2 Press and hold [Control] knob.
The RGB value of the selected illumination color is
displayed and enters the Details color adjustment
mode.
3 Set the color.
Operation type Operation
To select the color to adjust (Red,
Green, or Blue)
Press [ E] or [F].
To adjust color (Range: 0 – 9) Turn [Control] knob.
Determination of the adjusted color. Press [Control] knob.
The color you created can be called by selecting
“User”.
Exiting from the Function setting mode
Press and hold [ 1/6].