Electrix Tweaker User Manual
Page 43
6. SysEx Messages
43
Note: Setting the Note Off pressure threshold higher than the Note On pressure threshold will
create a pressure zone, where the TWEAKER will generate a Note Off message immediately after it
generates a Note On message. This is not usually desirable behavior and should be avoided.
CC Retrigger Rate
This Data Byte determines the rate at which all force sensitive pads stream CC messages, when CC
messages are enabled. This is a multiple of 5-milliseconds (ms).
Min:
0 (5ms)
Max:
127 (640ms)
Pressure Sensitive Pad Sensitivity
This Data Byte determines the rate at which the Output Velocity increases in response to increasing
Pressure from the user.
Min:
0 (Pads are least sensitive)
Max:
5 (Pads are most sensitive)