Electrix Tweaker - Manual (Page 32)

6. SysEx Messages
32
6 SysEx Messages
The following is a list of the TWEAKER’s factory default MIDI note and CC settings.
6.1 System Exclusive Command Bytes
The System Exclusive message includes the official MIDI Manufacturer ID for ELECTRIX, a Product
number, and the Command number. Each command is described in the following sections.
240, 0, 1, 106, 1, NN, ..., 247
The ELECTRIX identification number is 6A
The TWEAKER product number is 01
The Command number is NN
Note: All numbers in this specification are Base-10 (Decimal) numbers unless otherwise noted.
6.2 Set Messages
These messages allow you to change the settings of the TWEAKER.
01 : Button Mappings
This Message changes the MIDI mapping (Channel, Note/CC, and Number).
Total Bytes: 107
Data Bytes: 100
Data Bytes per Button: 2
1st Data Byte Received: Mapping Number
2nd Data Byte Received: Channel Number/ Output Type
Special Cases:
Encoder Speed Control Button
Output Type = 1
Mapping Number = 127