Electrix Tweaker - Manual (Page 22)

4. Default MIDI Settings
22
4 Default MIDI Settings
The following is a list of the TWEAKER’s factory default MIDI note and CC settings.
Soft Touch Buttons
Mapping: MIDI Notes 1-38
MIDI Channel: 1
No Speed Control Buttons Enabled
q RGB LED’s
Mapping: MIDI Notes 1-38
MIDI Channel: 1
Auto-light (Local Control): Off
Soft Touch Navigation Buttons
Mapping: MIDI Notes 39-43
MIDI Channel: 1
No Speed Control Buttons Enabled
q Red LED’s (Navigation Button Indicators)
Mapping: MIDI Notes 39-43
MIDI Channel: 1
Auto-light (Local Control): Off
Encoder Push Buttons
Mapping: MIDI Notes 44-50
MIDI Channel: 1
No Speed Control Buttons Enabled
q Blue LED’s (Encoder Push Button Indicators)
Mapping: MIDI Notes 44-50
MIDI Channel: 1
Auto-light (Local Control): Off
Potentiometers (Includes Faders)
Mapping (normal output): MIDI CC’s 51-55
Mapping (Center-Note): MIDI Notes 51-54
MIDI Channel: 1
Force Sensitive Pads
Mapping: MIDI Notes 63-70
Mapping: MIDI CC’s 71-78
MIDI Channel: 1
No Speed Control Buttons Enabled
q Red LED’s (Force Sensitive Pad Indicators)
Mapping: MIDI Notes 63-70
MIDI Channel: 1
Auto-light (Local Control): Off
Rotary Encoders
Mapping: MIDI CC’s 56-62
MIDI Channel: 1
Encoder Speed1: 5
Encoder Speed2: 1
Output Mode: Absolute Mode (except
Navigation Encoder which is in Relative Mode)
q LED Rings
Mapping: MIDI CC’s 79-84
MIDI Channel: 1
Encoder Link: On
Ring Mode: EQ Mode
General MIDI
Local Control: Off
Omni Channel: Off
External MIDI Jacks: Enabled