Electrix Tweaker - Manual (Page 21)

3. Hardware Controls
21
3.6.1 Mappability
CC Messages
Each potentiometer can be mapped to output to any CC (0-119) using the TWEAKER EDITOR or the
“Set Potentiometer Mappings” SysEx. Multiple pots can be mapped to output to the same CC. Each
encoder has it’s own individual output channel that can be changed using the TWEAKER EDITOR.
Center Note Messages
Each potentiometer’s center note message is mapped to the same note as it’s cc mapping. For
example, by default the left channel strip slider outputs channel 1, CC 53. Similarly, the center note
message for that slider outputs channel 1, note 53.
Default Settings
Rotary potentiometers are mapped to CC/Notes 51-52
Vertical sliders are mapped to CC/Notes 53-54
Crossfader is mapped to CC 55
All pots are mapped to MIDI Channel 1