Electrix Tweaker - Manual (Page 15)

3. Hardware Controls
15
3.3.2 Display Styles
RGB LED’s
There are 38 RGB (Red/Green/Blue) LED’s: 32 for the grid and three per channel strip. They have
eight states:
8 000-000: Off
8 001-003: Green
8 004-007: Red
8 008-015: Yellow
8 016-031: Blue
8 032-063: Cyan
8 064-126: Magenta
8 127-127: White
Monochromatic LED’s
There are 13 red monochrome LED’s and 6 blue monochrome LED’s. They have two states:
8 000-063: LED Turns Off
8 064-127: LED Turns Solid On
3.4 LED Rings
There are three LED rings per mixer channel strip. Each LED Ring is composed of 13 red LED’s.
3.4.1 Reception Modes
An LED ring’s display can be controlled by incoming Note / CC MIDI messages and the by the
encoder it surrounds.
By default, encoders are in Absolute Mode, and the LED rings display the current value of the
encoder. An LED ring also updates when the TWEAKER receives a MIDI message that matches its
mapping.
Note/ CC Messages
LED Ring mappings can be modified using the TWEAKER EDITOR, or the “Set LED Ring Map” SysEx
message. When the TWEAKER receives an LED ring-directed message, the LED ring is updated as
determined by its display mode and message velocity/value. These messages do not affect the