APC UPS control system - Manual (Page 126)

What is important to verify in the DOS window is that the root di-
rectory \ is mounted on device c:\.
The DOS window will be followed immediately by a Windows dialogue
box as follows:
!-- imagename=“Windows Install - Success” -- ¿
• On Windows 98, to actually start the service, either reboot the ma-
chine, which is not necessary, or open a DOS shell window, and type
the following commands:
cd c:\apcupsd\bin
apcupsd /service
Alternatively, you can go to the c:\apcupsd\bin folder with the Ex-
plorer and double click on the Start icon.
• On Windows NT, to start the service, either reboot the machine, which
is not necessary, or go to the Control Panel, open the Services folder
and start the apcupsd daemon program by selecting the apcupsd UPS
Server and then clicking on the Start button as shown below:
125