Agilent Technologies 34401A - Manual (Page 21)

See rear panel for proper fuse rating.
Agilent Part Number: 2110-0817 (250 mAT)
100, 120, 220 (230) or 240 Vac
1 Remove the power cord. Remove the
fuse-holder assembly from the rear panel.
2 Remove the line-voltage selector from
the assembly.
3 Rotate the line-voltage selector until the
correct voltage appears in the window.
4 Replace the fuse-holder assembly in
the rear panel.
Verify that the correct line voltage is selected and the power-line fuse is good.
1
Chapter 1 Quick Start
If the Multimeter Does Not Turn On
15