ADTRAN 1200350L1 User Manual
Page 82
Chapter 4: Configuration Overview
4-46
Router Option Module User Manual
61200350L1-1
SNMP Access
Write security: 3; Read security: 5
When set to:
No
- SNMP access is denied.
On
(def) - the Router Option Module will respond to SNMP manag-
ers based on the following lists.
SNMP/Communities
This list is used to set up to eight SNMP communities’ names that
the Router Option Module will allow. Factory default sets the com-
munity “public” with “Get” privileges.
Communities/Name
Write security: 1; Read security: 3
This is a text string for the community name.
Communities/Privilege
Write security: 1; Read security: 3
The access for this manager can be assigned three levels.
None
- No access is allowed for this community or manager.
Get
- Manager can only read items.
Get/Set
- Manager can read and set items.
Communities/Manager IP
Write security: 1; Read security: 3
This is the IP address of SNMP manager. If set to 0.0.0.0, any SNMP
manager can access the Router Option Module for this community.
SNMP/Traps
The Router Option Module can generate SNMP traps. See Appendix
D for trap types supported. This list allows up to four managers to
be listed to receive traps.
Traps/Manager Name
Write security: 2; Read security: 4
This is the text string describing the name of the entry. It is intended
for easy reference and has no bearing on the SNMP trap function.
Traps/Manager IP
Write security: 2; Read security: 4
This is the IP address of the manager that is to receive the traps.