ADTRAN 1200350L1 - Manual (Page 58)

Chapter 4: Configuration Overview
4-22 Router Option Module User Manual 61200350L1-1
Security/Filter Defines
The Router Option Module can filter packets based on certain pa-
rameters within the packet. The method used by the Router Option
Module allows the highest flexibility for defining filters and assign-
ing them to a profile. The filters are set up in two steps:
1. Defining the packet types,
2. Adding them to a list under the PPP profile or DLCI map.
See the section DLCI Mapping/Filters on page 4-32 for information on
how to set up filter profiles. This menu is used to define the individ-
ual filter defines based on packet type.
Filter Defines/MAC Filter Defines
Write security: 2; Read security: 3
The MAC filter is applied to bridge packets only. Bridge packets
which are forwarded by the bridge functionality of the Router Op-
tion Module are defined here. Up to 32 MAC defines can be specified.
Name Identifies the filter entry
Src Addr 48-bit MAC source address used for compari-
son. (hexadecimal format)
Src Mask Bits in the MAC source address which are com-
pared. (hexadecimal format)
Dest Addr 48-bit MAC destination address used for com-
parison. (hexadecimal format)
Dest Mask Bits in the MAC destination address used for
comparison. (hexadecimal format)
MAC Type 16-bit MAC type field used for comparison.
(hexadecimal format)
Type Msk Bits in the MAC type field used for comparison.
(hexadecimal format)