ADTRAN 1200350L1 - Manual (Page 125)

Appendix E: Terminal Mode Commands
61203.153L2-1 Router Option Module User Guide E-3
Additional Commands
Other commands available from the terminal mode are given be-
low:
Download/Uploading Configuration
The Router Option Module’s configuration can be captured to a
text file using the download command. The text file can be edited
if required.
Uploading the configuration can be accomplished by sending the
text file to the Router Option Module in terminal mode. A baud
rate of 9600 is strongly recommended when uploading. As soon as
the upload has been completed, type Save to save the new config-
uration to flash.
A reset command or power up cycle 10 seconds after the save
command is recommended to ensure that the new configuration
is complete.
Command Description
save Saves the configuration to non-volatile RAM
(flash).
mac Returns the MAC address for the Router Option
Module.
version Returns the firmware version and routing stack
version.
reset Resets the unit.
exit Leaves terminal mode and returns to menus.
download Downloads complete configuration to the termi-
nal screen for capture.