ADTRAN 1200350L1 - Manual (Page 60)

Chapter 4: Configuration Overview
4-24 Router Option Module User Manual 61200350L1-1
Filter Defines /IPX Filter Defines
Write security: 2; Read security: 3
The IPX filter defines apply to any IPX packet whether it is routed
or bridged. Also, any IPX encapsulation type will be accounted for.
Up to 32 IPX defines can be specified.
Dst Port IP destination port number used for comparison
Range: 0 to 65535. (decimal format)
Dst Port
Cmpr Type of comparison that is performed:
=
-- ports equal to
not = -- port not equal to
> -- port greater than
< -- port less than
None -- the destination port is not compared
Proto Protocol used for comparison.
Range: 0 to 255. (decimal format)
Proto Cmpr Type of comparison that is performed:
=
-- protocols equal to
not = -- protocols not equal to
> -- protocols greater than
< -- protocols less than
None -- the protocol is not compared
TCP Est Yes - only when TCP established
No - only when TCP not established
Ignore - ignore TCP flags
Name Identifies the filter entry (15 characters, max)
Src Net 32-bit source network address
Src Mask Bits in the source network address which are com-
pared. (hexadecimal format)
Dest Net 32-bit destination network address
Dest
Mask Bits in the destination network address which are
compared. (hexadecimal format)