Summers Superchisel - 5-Section - Manual (Page 74)

MH MNTNG ARM ASSY 9/8/2010 8H2314.iam/
A
8X0073
1/2 X 5"
8X0123
3/4" X 5.5"
8X0099
5/8" X 6-3/4"
8X0304
5/8" LW
8X0250
5/8" N
8H2100
8X0261
3/4" LN
8X0242
NY-LOCK 1/2" N
8X0118
3/4 X 4"
8X0014
1/4 X 3"
8X0222
1/4" LN
8X0261
3/4" LN
8H2184
8W1204
1/2 X 3 X 3"
8H2190
8H1280
ARM LENGTH
8H2132 - 34"
8H2142 - 42"
8H2144 - 52"
8H2120
FRAME SIZES
WING-ARM TRAVEL STOP
MATCH LOCATION LETTER
ON SUPPORT ROD ASSEMBLY
WING-ARM TRAVEL STOP
DO NOT OVERTIGHTEN
ARM MUST BE FREE TO ROTATE
C
B
A
A B
C
8Z0101
SMC DECAL
8Z0052
PATENT DECAL
8X0306
3/4" LW
8X0117
3/4 X 7"
8X0246
1/2" FN
3"
4"
5"
6"
2 1/2"
8H1394
8W1897
8H1315
8D5219
8H1307
8H1327
8H2131
8X0269
8X0101
5/8" X 8" (SC)
8H2104
CHANNEL 6"
8H2102
CHANNEL 4"
1. 52” mounting arms (PN 8H2314) should be used when attaching Summers mounted harrows.
2. Mounting arm location can be found on the following layout drawings.
– In certain locations, the mounting arm will be installed directly behind a liftarm pivot. A
spacer block has been welded to the chisel plow frame so there is no interference between
u-bolts and the mounting head.
NOTE: Make sure that if one mounting arm rests against a spacer block, that the other mounting
arm, on that section, also rests against a spacer block.
3. Set harrows according to performance desired.
SECTION 6 – PARTS
6-14