Summers Superchisel - 5-Section - Manual (Page 46)

3-2
SECTION 3 – CHISEL PLOW OPERATION
INITIAL HOOKUP
1. Make tractor to hitch connection with locking draw pin and safety chain.
2. Retract jack and rotate into storage position. Connect Safety Light Kit to 7 pin receptacle.
3. Plug wing lift hoses into desired tractor outlet. Insure that tips and couplers are CLEAN.
4. Plug depth control hoses into desired tractor outlet.
5. Park tractor and chisel plow on a level surface.
6. Remove transport lock pins on wings.
7. Lower the wings with caution.
Do not raise or lower the wings
when moving. Operate tractor
hydraulics from operator sta-
tion only. Do not allow anyone
to stand near the Chisel Plow
when folding or unfolding.