Summers Superchisel - 5-Section - Manual (Page 16)

SECTION 2 – SET-UP OF CENTER SECTION
3. Block center frames off the floor.
4. Install cylinder attach brackets with 3/4” u-bolts.
NOTE: – Rear cylinder attach brackets (8T4226) should be centered at 62” from the center
of the frame.
– Front cylinder attach bracket (8T4200) should be centered on the front of the
frame.
5. Insert eyebolts (8K1683) into each cylinder attach bracket.
– Tighten 1-1/2” nuts so the same amount of threads are above the top nut on all eye-
bolts. Insure that cylinder attach holes are aligned when eyebolts are tightened.
5a. Install brace behind front center cylinder attach bracket with 3/4” u-bolts.
2-4