Summers Superchisel - 5-Section - Manual (Page 18)

2-6
SECTION 2 – SET-UP OF CENTER SECTION
10. Attach wheels onto hubs with 5/8” wheel nuts (torque required: 170 ft-lbs).
11. Attach wing transport locks to center frame with 3/4” u-bolts.
– See Detail View A for location of front transport locks. Position rear transport locks at same
distance from center.
– Install Transport lock pins inside storage holes of transport locks.
12. Insert 1-1/2 x 10-3/8” eyebolts into wing lift cylinder attach base.
– Leave 1-1/2” nuts loose, they will need to be adjusted after wing is installed.
13. Attach wing lift cylinders to frame with pins and roll pins provided with cylinders.
– Four 5 x 36” cylinders (8K9650) are used.
REAR VIEW WALKING
TANDEM