Summers Superchisel - 5-Section - Manual (Page 56)

3-12
SECTION 3 – CHISEL PLOW OPERATION
4. Use a safety chain between tractor drawbar and chisel plow hitch when transporting.
5. Only tow at a safe speed – 20 MPH MAXIMUM. Use caution when making corners or
meeting traffic.
6. Follow all local laws governing transporting of farm machinery.
7. Be aware of and comply with all height and width transport requirements. (See specifica-
tions page 5-2).
8. Stay clear of overhead lines.
9. Frequently check for traffic from rear, especially during turns.
10. Avoid sharp turns on hard surfaces. Solid mounted lift arms may cause wheel assem-
blies to scuff. Damage to tires and machine could occur.
UNHOOKING CHISEL PLOW FROM TRACTOR
1. Lower Chisel Plow into field position and relieve hydraulic pressure from cylinders before
disconnecting from tractor.
2. Disconnect hydraulics and safety light kit wiring harness.
3. Rotate jack into standing position and extend jack.
4. Block tires to prevent movement of machine after unhooking.
5. Remove draw pin and safety chain.