Summers Hydraulic Fold Coil - Manual (Page 10)

SECTION 1 - SAFETY
1-6
GENERAL ASSEMBLY SAFETY PRACTICES
YOU ARE RESPONSIBLE for the
safe assembly of the machine.
DO NOT ALLOW CHILDREN or
other unauthorized persons within
the assembly area.
WEAR PERSONAL PROTECTIVE
EQUIPMENT which includes a
hard hat, eye protection, work
gloves and steel toed boots with
slip resistant soles.
DO NOT MODIFY the equipment
or substitute parts in any way. Un-
authorized modification may im-
pair the function and/or safety of
the machine.
USE SUITABLE LIFTING DEVICE
for components which could cause
personal injury.
BLOCK UP ANY RAISED PART of
the machine. Be sure machine is
stable after blocking.
ALWAYS INSPECT LIFTING
CHAINS AND SLINGS for damage
or wear.
BE SURE LIFTING DEVICE
IS RATED TO HANDLE THE
WEIGHT.
STOP ENGINE, place all controls
in neutral, set parking brake, re-
move ignition key and wait for all
moving parts to stop before serv-
ing or adjusting.
BE SURE PRESSURE IS
RELIEVED from hydraulic circuits
before servicing or disconnecting
from tractor.
USE EXTREME CARE when
assembling, servicing or adjusting.
GENERAL ASSEMBLY INSTRUCTIONS
1. READ AND UNDERSTAND Operator’s Manual before assembly of machine.
2. Reference to “ RIGHT” and “LEFT” is determined when machine IS VIEWED FROM THE
REAR.
3. Reference to “ FORWARD” means TOWARDS THE TRACTOR.
4. Reference to “ REAR” means AWAY FROM THE TRACTOR.