HighPoint RocketRAID 2210 - Manual (Page 87)

Mac OSX Driver and RAID Management Software
Expanding/Migrating an Array
With the OCE/ORLM function, you can migrate an array from one RAID level to
another RAID level and/or expand the array dynamically, even under I/O load. This
function implements both Online Capacity Expansion (OCE) and Online RAID Level
Migration (ORLM).
To expand/migrate an array:
1) Select “Manage - Array” from the menu.
2) Click the Maintenance button.
3) Select the target array type.
4) Click the OCE/ORLM button.
5) The OCE/ORLM page will appear. The interface is similar to the array creation
wizard.
To verify an array:
1) Select menu “Manage - Array”.
2) Click the Maintenance button.
3) Click the Verify button to start the verify process.
Rebuilding an Array
When a redundant array enters a critical/broken state, a rebuild is necessary to
restore the array’s redundancy (security). The rebuild process for an array generally
starts automatically. If you have aborted a rebuild process, you can start it manually.
To rebuild an array:
1) Select menu “Manage - Array”.
2) Click the “Maintenance” button.
3) Click the “Rebuild” button. The rebuild process should begin.
7-8