HighPoint RocketRAID 2210 - Manual (Page 84)

Mac OSX Driver and RAID Management Software
3 Array Management
Creating an Array
To create an array:
1) Select “Manage - Array” from the menu.
2) Click the Create Array button. The create array page will appear.
3) Choose the array type you want to create from the drop-down list.
4) Enter a name for the array (this is optional).
5) If you are creating a redundant RAID array (RAID1, 5, 10), select an initialization
option for the array.
Note: An un-initialized RAID1 or RAID10 array can still provide redundancy in case of
a disk failure. A RAID5 array, however, is not fault-tolerant until initialization is
finished.
6) If you are creating RAID5, specify a cache policy for the array:
7-5