HighPoint RocketRAID 2210 User Manual

Page 81

Mac OSX Driver and RAID Management Software

The installer will ask you to select a destination for the driver. Make sure to

select the boot Volume - the driver must be installed to /System/Library/Exten-

sions/ folder in order to function properly.

Click the “Install” button.

You will be prompted: “clicking the install button will install a basic installation of

the software package on your selected volume”. Confirm the prompt to install

the software package.

You will then be notified that a reboot is needed to install the software. Click

“Continue Installation”.

The driver will then be installed into the system. Click “Restart” to restart the

system.

After the system restarts, you can use a web browser to configure the controller and

setup RAID arrays. Use MacOSX Disk Utility to create partitions the RAID arrays.

Web RAID Management Interface

Note: To use the web-based RAID management interface, a web browser with XML

support is required, e.g. Internet Explorer 6.0, Mozilla or FireFox.

To run the management interface, start your browser and enter the following URL

address:

https://localhost:7402

If you are managing a remote system please change “localhost” to the server’s host

name or IP address.

7-2