Vaisala Spectrum 4.0 - Manual (Page 58)

Working with Graphs
52
2. Select the appropriate time zone from the drop-down list.
3. Click OK.
Formatting Measurement Units
Veriteq Spectrum Software automatically determines Y-axes scales appropri-
ate for any displayed graph and sets a default level of decimal place precision.
If desired, you can override these settings.
Specifying the Y-axis Scale
To change a Y-axis scale:
1. Do one of the following:
• With the Graph file you want to modify open, select
Format>Units...
• Right-click the Y-axis units, and select Format>Units...
• Double-click the Y-axis units.
The Format Units window opens.
2. Under Units, use the drop-down list to select the desired units of measure-
ment.
3. Choose to apply the settings to the current graph or all new graphs (System
Default) using the appropriate radio buttons. If you select System Default,
the settings entered here automatically apply to new graphs that use the
same units (that is,
°C, °F, and so on).
4. Under Scale, select the Manual button, then enter the maximum and min-
imum values for the axis that you want displayed.
5. Click Apply to apply changes, and OK to close.