Caring for relative humidity sensors – Vaisala Spectrum 4.0 User Manual
Page 40
Getting Started
34
2. Attach the temperature probe to the connector on the data logger.
3. Use the Logger>Setup window to test the data logger operation (refresh
the readings as required).
4. Place the logger in the desired location and start recording.
Caring for Relative Humidity Sensors
Each Veriteq SP-2000 data logger has a relative humidity sensor. Although the
sensor has been designed to resist contamination and condensation, avoid ex-
posing the data logger to contaminants, if possible.
For information on specific environments, contact Veriteq Instruments.