Vaisala Spectrum 4.0 User Manual
Page 25
Veriteq Spectrum 4.0 User’s Guide
19
3. The Logger Setup window opens.
The information shown in the Logger Setup window relates to the data
logger connected to the COM port you have specified. Some fields shown
will vary depending on the model of data logger in use.
You can use this window to:
• Edit the data logger description.
• Set the sample timing.
• Enable or disable data logger channels.
Any changes will affect only the data logger currently connected to the
COM.
4. Click Close to close.
Understanding the Logger Setup Window
The following table describes the information displayed on the Logger Setup
window:
Description
Logger description. (For information on configuring the logger description, see
Configuring the Data Logger Description on page 21
Hardware Model
Hardware model number of the currently-connected data logger.
Hardware Revision
Hardware version number associated with the currently connected data log-
ger.
Firmware Version
Firmware version associated with the currently connected data logger.
Serial Number
Unique eight-character product serial number of the currently-connected data
logger. This number should match the serial number label on the back of the
data logger.