Vaisala DPT145 User Manual

Page 27

Chapter 4 ________________________________________________________________ Installation

VAISALA ________________________________________________________________________ 27

6. Connect the cable to port II on the

transmitter, and route the cable to the cable

clamp on the underside of the weather

shield. Attach the cable using a crosshead

screwdriver.

Note: Let some of the cable hang from the

back of the transmitter, so that

condensation cannot run along the cable to

the transmitter.

For cables with a straight connector:

move the rubber plug to the bottom hole

and route the cable from the back of the

weather shield.

7. Replace the weather shield cover using an

8 mm box-end wrench.