Vaisala DPT145 - Manual (Page 25)

Chapter 4 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 25
Installation With Weather Shield
1. When DPT145 is ordered with the weather
shield, the transmitter is delivered already
attached to the shield.
If you have ordered the weather shield
separately, attach the transmitter to the
weather shield before continuing this
procedure. Fit the clamp of the weather
shield over the adapter, not the transmitter
body. For ABB Malmkvist and Alstom
G1/2" type adapters, place the clamp over
the notches in the adapter.
2. Use an 8 mm box-end wrench to loosen
the four bolts that hold the weather shield
cover. Remove the cover.
It is not necessary to remove the bolts,
they can remain in place during
installation.
3. Remove the yellow transport protection
plug. Make sure the surfaces are clean and
dry.