Vaisala DMT152 - Manual (Page 55)

Chapter 5 ________________________________________________________ Serial Line Operation
VAISALA ________________________________________________________________________ 53
Other Commands
Opening the Transmitter in POLL Mode
Use the OPEN command to connect to a transmitter that is in POLL
mode.
OPEN [aa]
where
aa = address (0 ... 99)
Example:
open 1
DMT152 1 line opened for operator commands
Closing the Connection to a Transmitter
in POLL Mode
The CLOSE command closes the connection to a transmitter.
CLOSE
Example:
close
line closed
Display Command List
HELP
Set Time
Use the TIME command to view and set the transmitter clock. The clock
does not have a battery backup – it is reset to 00:00:00 when the
transmitter is powered up or reset.
TIME [hh mm ss]
where
hh = Hours (24-hour clock)
mm = Minutes
ss = Seconds