Vaisala DMT152 - Manual (Page 38)

User's Guide _______________________________________________________________________
36 ___________________________________________________________________ M210865EN-F
Show Transmitter Status
The STAT command displays the status of the transmitter in four
characters.
STAT
The characters in the output have the following meaning:
[sensor purge] - [output frozen] - [settling] - [status]
During normal measurement all characters are zeroes. When purge is
activated, output frozen, or the transmitter is in the settling period after
sensor purge, the corresponding status character is 1.
The final status character can have several values:
0 = Normal status
1 = Transmitter error
7 = Retrying auto-calibration due to fluctuations in the supply voltage
9 = Transmitter startup
Some example status codes:
0109 Transmitter performing startup procedure
1100 Sensor purge in progress, output frozen
1110 Settling period after purge, output frozen
0000 Normal measurement
Example:
stat
0000
NOTE It is normal for measurement output to freeze temporarily if the
measurement environment is changing rapidly.
Show Firmware Version
VERS
Example:
vers
DMT152 / 1.10