Posey KeepSafe® Deluxe - Manual (Page 32)

32 KeepSafe ® Deluxe
Toilet Sensor (Cat. 8332). For use on toilets. Attaches to toilet seat with adhesive backing.
Posey under mattress Bed Sensor, heavy (Cat. 8285h). Electronic pressure sensitive sensor for under
mattress use. Calibrated for standard hospital mattresses weighing more than 42 lbs. (19 kgs.) with a
minimum patient weight of 130 lbs. (59 kgs.) to activate the sensor. No maximum pressure. Designed for
34¾” (88 cm) bed width.
Posey under mattress Bed Sensor, light (Cat. 8285l). Electronic pressure sensitive sensor for under
mattress use. Calibrated for standard hospital mattresses weighing more than 38 lbs. (17 kgs.) and less than
42 lbs. (19 kgs.) with a minimum patient weight of 50 lbs. (23 kgs.) to activate the sensor. No maximum
pressure. Designed for 34¾” (88 cm) bed width.
gel Foam alarm Cushion (Cat. 7223F). Electronic pressure sensitive sensor pad designed for use in
wheelchair or Geri-chair. Minimum patient weight of 50 lbs. (23 kgs.) when placed on top of seat cushion
and 65 lbs. (29 kgs.) when placed under seat cushion.
EZ Clean alarm Belt (Cat. 8358). Chair Belt Sensor that forms an electronic circuit. Activates when self-
release button is pressed. Also serves as a positioning aid for those patients who tend to slide forward.
Attaches to chair with “D” rings.
Chair Belt Sensor (Cat. 8360). Chair Belt Sensor that forms an electronic circuit. Activates when self-
release button is pressed. Also serves as a positioning aid for those patients who tend to slide forward.
Attaches to wheelchair with existing hardware.
mobile Chair Belt Sensor (Cat. 8371). Chair Belt Sensor that forms an electronic circuit. Activates when
self-release button is pressed. Also serves as a positioning aid for those patients who tend to slide forward.
Attaches to chair with “D” rings.
hook and loop alarm Belt (Cat. 8372, 8372l). Chair Belt Sensor that forms an electronic circuit. Activated
when conductive fabric is separated by pulling on bright yellow hand loop. Also serves as a positioning aid
for patients who tend to slide forward. Attaches to a chair with “D” rings. The 8372l is designed for use with
larger patients and on larger chairs, such as recliners and upholstered lounge chairs. Secures around back of
chair with one set of metal loops at one end to allow the other strap to attach through metal loops.
Exit alarm mat, Small (Cat. 8250S). Electronic pressure sensor pad for use on floor. Activates alarm when
patient steps on sensor. Measures 36” x 24” (91 cm x 61 cm). Designed for use in a doorway.
Exit alarm mat, large (Cat. 8250l). Electronic pressure sensor pad for use on floor. Activates alarm when
patient steps on sensor. Measures 60” x 24” (152 cm x 61 cm). Designed for bedside use.
PiR Sensor (Cat. 8351). Passive Infrared Sensor provides non-invasive patient monitoring. PIR Sensor senses
a change in temperature when patient moves in front of Infrared beam and activates alarm.
Bed Bracket, Standard (Cat. 8276). Attaches alarm to headboard or footboard. Fits boards ½” – 2”
(1 cm - 5 cm) thick.
Wheelchair/Wall mount Bracket without wire clip (Cat. 8276). Attaches alarm to wheelchair or Geri-
chair using existing chair hardware. Also attaches alarm to a wall using “hook” and “loop” adhesive strips or
screws.
Saddle Bracket (Cat. 8278N). Attaches the alarm to the chair.
Wheelchair Bracket (Cat. 8289). Screws into any wheelchair back.
aC Power adapter (Cat. 8383). Connects alarm to AC power.