APC iSCSI SATA II - Manual (Page 80)

[80]
B. Event Notifications
š PD events
Level Type Description
INFO Disk inserted Disk is inserted into system.
WARNING Disk removed Disk is removed from system.
ERROR HDD failure Disk is disabled.
š HW events
Level Type Description
WARNING ECC error Single-bit ECC error is detected.
ERROR ECC error Multi-bit ECC error is detected.
INFO ECC info ECC memory is installed.
INFO ECC info Non-ECC memory is installed.
INFO SCSI info Received SCSI Bus Reset event at the
SCSI Bus .
š EMS events
Level Type Description
INFO Power installed Power is installed.
ERROR Power absent Power is absent.
INFO Power work Power is restored to work.
ERROR Power warning Power is out of work.
WARNING Power detect PSU signal detection .
INFO Fan work Fan is restored to work.
ERROR Fan warning Fan is out of work.
INFO Fan installed Fan is installed.
ERROR Fan not
present Fan is not present.
WARNING Thermal
warning
System temperature is a little
bit higher.
ERROR Thermal critical System Overheated !!!
ERROR Thermal critical
shutdown
System Overheated !!! The
system will do the auto shutdown
immediately.
WARNING Thermal ignore
value
Unable to update thermal value on
.
WARNING Voltage
warning
System voltage is a little bit
higher/lower.
ERROR Voltage critical System voltages failed!!!
ERROR Voltage critical
shutdown
System voltages failed!!! The
system will do the auto shutdown
immediately.
INFO UPS info UPS detection succeeded.
WARNING UPS error UPS detection failed.
ERROR UPS error AC loss for the system is detected.
ERROR UPS error UPS Power Low!!! The system will do the