APC iSCSI SATA II - Manual (Page 15)

[15]
Chapter 2 Getting Started
2.1 Packaging, Shipment and Delivery
™ Before removing the subsystem from the shipping carton, you should visually
inspect the physical condition of the shipping carton.
™ Unpack the subsystem and verify that the contents of the shipping carton are
all there and in good condition.
™ Exterior damage to the shipping carton may indicate that the contents of the
carton are damaged.
™ If any damage is found, do not remove the components; contact the dealer
where you purchased the subsystem for further instructions.
2.2 Unpacking the Subsystem
The package contains the following items:
• iSCSI RAID subsystem unit
• One power cord
• Three Ethernet LAN cables
• One RS232 null modem cable (phone jack to DB9)
• One UPS cable (phone jack to DB9)
• Installation Reference Guide
• Spare screws, etc.
If any of these items are missing or damaged, please contact your dealer or sales
representative for assistance.