APC iSCSI SATA II User Manual
Page 59
[59]
Step 4: Set global spare disk.
To set a global spare disk, please follow the step.
1. Select “/ Volume configuration / Physical disk”.
2. Move the mouse pointer to the gray button next to the PD slot; click “Set
Global spare”.
3. “GS” icon is shown in “Usage” column.
Step 5: Done. Host initiator can connect to the LUNs and use as disks.
To delete VD and RG, please follow the steps listed below.
Step 6: Detach LUN from VD.
In
“/ Volume configuration / Logical unit”,
1. Move the mouse pointer to the gray button next to the LUN; click “Detach”.
There will pop up a confirmation page.
2. Choose “OK”.
3. Done.