APC iSCSI SATA II - Manual (Page 52)

[52]
3.6.4 Virtual Disk
Enter “Virtual disk” function to view the status of each user data volume.
The following is an example of how to create a VD:
Step 1: Click “ ”, enter “Name”, choose “RG name”, “Stripe
height (KB)”, “Block size (B)”, “Read/Write” mode, “Priority”, “Bg
rate” (Background task priority), change “Capacity (GB)” if necessary.
Then click “
”.
Step 2: Confirm page. Click “ ” if all setups are correct.
It’s done. View the “Virtual disk” page.
VD column description:
No. Number of this Virtual disk. The button next to the VD
No. shows the functions which can be executed.
Name Virtual disk name.
Size(GB) Total capacity of the Virtual disk.