APC iSCSI SATA II User Manual

Page 36

Text mode
Original mode

[36]

3.4.5 Notification Setting

You can use “Notification setting” to set up SNMP trap for sending alerts via SNMP,
pop-up messages via Windows Messenger (not MSN), and alerts via syslog protocol,
and set event log filter.

“SNMP” allows up to 3 SNMP trap addresses. Default community is set to “public”.
User can choose the event log levels; the default setting only enables INFO event log
in SNMP. There are many SNMP tools. The following web sites are for your reference:

SNMPc:

http://www.snmpc.com/

Net-SNMP:

http://net-snmp.sourceforge.net/