Sandvik Coromant Threading - Manual (Page 75)

75
3. Products
GC1620
Coating: PVD TiAlN (thin)
Tools: CoroMill Plura
CoroMill Plura grade for semi-fi nishing to fi nishing operations
demanding wear resistance, especially in dry machining. Also per-
forms well when machining stainless steels in wet conditions.
Covers ISO P -M -K -S -H materials, with grade hardness ≤56 HRc.
GC1105
Coating: PVD TiAlN coating (thin)
Tools: CoroCut XS
First-choice grade for the ISO M and -S area. A hard substrate with
a thin coating ideal for sharp edges makes it fi rst choice for thread-
ing in medical components. Also with high plastic deformation
resistance.
GC1630
Coating: PVD TiAlN
Tools: CoroMill Plura
CoroMill Plura grade for roughing to semi-fi nishing operations de-
manding edge line toughness. Also performs well when machining
very soft- and smearing steels.
Covers ISO P -M -K -N -S materials, with grade hardness ≤48 HRc.