Coroturn® xs, Coroturn® xs – internal precision threading – Sandvik Coromant Threading User Manual
Page 58
58
3. Products - thread turning
CoroTurn® XS – internal precision threading
CoroTurn XS has an insert in the form of a rod, mounted in an
easily-indexable adaptor. The tool is intended for precision machin-
ing in hole diameters from 0.3 – 12 mm (.012 – .412 inch), with
extremely sharp cutting edges giving good results at low feeds.
Threading inserts are available for UN, Whitworth, metric, TR and
NPT thread forms.
CBN inserts
CB7015
For cutting data information, refer to chapter 5, Technical reference (page 86) and for
infeed recommendations see chapter 5, Technical reference (page 110).