PortaTree Snap-In Weather used with the Eliminator 2000 Practice Tree - Manual (Page 5)

5
any values of weather. Make sure that you go to Weather Logging and
“Match to Race” to flag weather data and enter your run. You can enter
the race information from your time slip. The date and time are the time that
the weather was flagged and the race # is automatically indexed from the
data already entered. You will then be prompted to enter the Car and Track
which can be any value from 1 to 255. You can enter multiple cars and
multiple tracks where you race. Make sure to keep track of the numbers.
The Eliminator prompts you for all of the race data from the time slip and you
can use the number pad and arrow keys to enter data. Once the data is
correct, use the Stage/Enter key to save the data or the Stage/Escape key
to go back one field (in case you make a mistake). At the end, you will be
prompted to save to memory or escape to lose the information.
4 - Show Races Sorted by:
2
Entry Order -- Displays in order entered
3 Track -- Displays by track number
4 Corr Alt -- Displays by Corrected Altitude
Use the up down arrow to review the Different Runs. Use the Left/Right
Arrow to Review all of the run data and weather data. This helps determine
what your vehicle will run based on weather conditions as well as track
conditions. You make the decisions based on total run performance.
The Eliminator 2000 will prompt you for the car number that you wish
to display information and if “0” is selected, all information will appear.
5 – Memory Stats ( this item does not appear on the screen)
Free Cal Wx Runs
510 1 0 0
NOTE: “Free” is memory that can be used. Cal is memory used for
calibration values. Wx is memory used for weather information storage.
Runs are the number of runs that are in memory storage.
Select Menu Item 5 to Review the Memory Stats
Free Cal Wx Runs
510 1 0 0
NOTE: “Free” is memory that can be used. Cal is memory used for
calibration values. Wx is memory used for weather information storage.
Runs are the number of runs that are in memory storage.
Select Menu Item 6 to Connect to Personal Computer
PC Linkup Depress Stage/Escape to Return
The connection to the Personal Computer will automatically be completed
when you run the P.C. software program. You must see PC Linkup on the screen
before you attempt to transfer files from the PC.