PortaTree Snap-In Weather used with the Eliminator 2000 Practice Tree - Manual (Page 4)

4
You will now be at the Main Weather Menu. Use the "Down" Arrow key to
view the entire menu options:
1 - Return to Elim Returns to Eliminator Main Menu
2 - Current Wx Allows you to review Current Weather
3 - Weather Logging Log and Save Weather -- Match to Race
4 - Race Logging Enter Information from time slip
5 - Memory Stats Review how much memory is left
6 - PC Link-Up Connection to Personal Computer
7 - Clear Memory Clear old Weather Data
9 - Redo Date/Time Reset or Correct Date and Time
If you select any Menu Item 2 through 9 above you can use the Stage/Escape Key
to return to the Main Weather Menu above.
Select Menu Item 3 to enter Weather Logging Menu:
2 - Log and Save If there are any weather samples in memory, the Eliminator
2000 will ask to clear “Erase old Weather”. If there are excess erased weather
samples, the Eliminator will automatically recover the memory so that it can be
used over again. Depress "Enter" then Use Up or Down Arrow to select the
time interval you would like to use and the Eliminator will automatically start
logging weather data every (x -time you selected) minutes. The selection also
shows how many hours of weather can be logged using the selected time
interval. Depress "9" and then "2" to exit logging.
3 - Match to Race Use this item to review weather data and match race time
to weather time. Use the Up and Down arrow keys to review the data and use
the "6" key to flag the weather information so that race data can be entered.
After flagging weather data, the Eliminator 2000 will immediately proceed to
race entry so that you can enter the data from your time slip. See the enter
race section below for entry information.
4 - Calibration: 2 Show Calib --This item displays the current calibration values
3 Enter Calib--This item allows you to enter a new calibration value
5 – Memory Stats ( this item does not appear on the screen)
Free Cal Wx Runs
510 1 0 0
NOTE: “Free” is memory that can be used. Cal is memory used for
calibration values. Wx is memory used for weather information storage.
Runs are the number of runs that are in memory storage.
Select Menu Item 4 to enter Race Logging Menu:
2 - Enter Race
Enter Race data from time slip
The Eliminator 2000 will warn you if no weather log has been flagged for
race entry. If you proceed without flagging weather, the run log will not have