Outback Power Systems GVFX Series Inverter/Charger Installation Manual - Manual (Page 55)

53
FX PARTS AND ACCESSORIES
BATTERY TERMINAL COVERS
• The caps are made of stiff plastic with a snap-on
design; remove them carefully using a flat-blade
screwdriver inserted into the slots on the sides of
each cover.
• DC conduit may be required for exposed
installations.
• The DCA cover option (see below) allows conduit
connection.
• Always keep the battery terminal covers installed.
AC CONDUIT PLATE
• AC conduit connects to the AC Con-
duit Plate for installations which do
not utilize an optional FW-ACA.
DCA (DC CONDUIT ADAPTER)
• Allows the connection of two-inch TSC (Trade Size
Conduit) to the FX
• Connects to OutBack’s FLEXware enclosures
DCC (DC COMPARTMENT COVER)
• Covers the DC terminal area and provides space
to mount other components such as a DC current
shunt
• Can be used with or without the DCA
• This is an optional accessory.
FW-ACA (AC CONDUIT ADAPTER)
• Extends the AC wiring compartment
• Connects to OutBack’s FLEXware enclosures
• Protects and secures flexible cable with strain relief
• Houses the FLEXware Surge Protector
• Knockouts are intended for cables/strain relief
• This is an optional accessory.
TURBO FAN COVER
• Included in place of a DCC on sealed FXs