GReddy e-Manage Ultimate Installation Manual - Manual (Page 6)

2. Unit Description
5
ACTIVE L.E.D
• Steady GREEN - - - - - - When the unit recognize Ignition ON
• Flashing GREEN - - - - - When Fouled Plug feature is activated (When engine
is started with wide open throttle)
• Quick Flashing RED - - - - When Self Diagnostic has detected an error
• Flashing RED - - - - - - - When Warning is activated
• Flashing Orange - - - - - During Main Unit Data Logging
INTERACTION L.E.D.
• Steady - - - - - - - - - - When the unit recognize Ignition ON
• Slow Flash - - - - - - - - When confirming engine rpm
• Flashing - - - - - - - - - When communicating with PC
DIP SWITCH
• Used turn ON/OFF the maps that are set in the Parameter setting (Front Panel)
SWITCH
• Used with the Remote Switching System (sold separately) or Switching Harness
(Sold separately).
SERIAL
• Used to link the GReddy Warning Meters with a Data Link Cable (sold separately)
OPTION1,2
• Used to connect GReddy Pressure Sensor, GReddy Temp Sensor, and/or A/F
Input Harness.
USB-B
• Used to communicate with a PC. Connect the B side of a standard USB cable
CONNECTOR
• Connect the Plug-in Harness (sold separately) or Universal Harness Kit (sold
separately) Connector 14P, 18P, 12P