beautypg.com

How to splice wires, How to install the connectors – GReddy e-Manage Ultimate Installation Manual User Manual

Page 11

background image

5. How to splice wires

1.Strip the wire as shown.

6. How to install the connectors

2.Wrap the stripped wire together as

shown, and set the crimp in place.

*Crimp is not neccessary if soldering.

3.Crimp or solder the connection.

4.wrap the connection with shrink tube or

electrical tape.

1.Strip the end of the wire and slip

the protective sleeve on.

2.Set the connector over the stripped end.

3.Crimp the inside part with

proper crimping tool.

4.Crimp the out side part and slip the protective

sleeve over the connector.

10