DAVIS Extra Solar Panel Kit (6616) User Manual
Page 4

3
3. From inside the shelter, feed the single-connector end of the Y-cable down
through the hole in the floor of the shelter. Outside the shelter, wrap a round-
hole grommet around the cable and insert the grommet snuggly into the hole.
4. In the Solar Power Kit or Vantage Connect shelter, unplug the solar power
cable from the charger circuit’s front jack and plug it into the Y-cable.
5. Plug the other Y-cable connector into the solar power (front) jack. (See your
Solar Power Kit User Manual.)
6. Close and lock the Solar Power Kit or Vantage Connect shelter.
7. Remove the round split grommet from one of the holes in the bottom of the
Extra Solar Panel Kit shelter.
8. Wrap the grommet around the single-connector end of theY-cable. Feed the Y-
cable up through the hole in the Extra Solar Panel Kit shelter floor. Insert the
grommet snuggly into the hole.
9. Inside the Extra Solar Panel shelter, connect the single-connector on the Y-
cable to the solar power cable.
10. Close and lock the Extra Solar Power shelter.
11. You may want to secure the cable to the pole.
Solar Power Cable
Y-Cable
Grommet
Solar Power Jack
(front)
Feed cable down
through hole
Note: For clarity, the solar power cable is shown in front of the
battery. In use, the cable will run behind the battery.
Grommet
Feed cable up
through hole
Connect to Solar
Power Cable