DAVIS Metric Rain Calibration Information - Manual (Page 2)

Page 2
To Display Rain Data in Metric Units in WeatherLink Software
1. In the Weatherlink Software, select the “.01 in” rain collector in the
Station Config dialog box found in the Setup menu.
Note: Do not select .2 mm or .1 in in the Station Configuration dialog box. The
.2 mm and .1 in settings are not currently supported by the rain collector
shipped with Vantage Pro .
2. Select “mm” for rain in the Select Units dialog box.
Use the “.01 in” Rain Collector setting.
Select the “mm” set-
ting for Rain in the
Choose Units dialog
box.
Metric Rain Insert D002.fm Page 2 Wednesday, November 14, 2001 12:30 PM