DAVIS Wireless Temperature Station - Manual (Page 2)

Page 2 Wireless Temperature Station
T OOLS FOR S ETUP
In addition to the components shown, you will need some or all of the follow-
ing materials:
✦ Adjustable wrench or 7/16" wrench
✦ Ballpoint pen or paper clip (small pointed object of some kind)
✦ Drill and 3/16" (5 mm) drill bit (if mounting on a vertical surface)
I NSTALLATION S TEPS
For ease of installation, please follow steps in the order presented.
✦ Prepare the temperature station, page 3
✦ Insert the battery, page 3
✦ Set the transmitter ID, page 4
✦ Set ID on the temperature station using DIP switches, page 4
✦ Set the console to recognize the signals, page 5
✦ View current temperature, page 5
✦ (If you don’t see temperature from the correct Station No., put the
transmitter in TEST mode, page 5)
✦ Choose a location for the wireless temperature station, page 6
✦ Test transmission from the proposed mounting location, page 8
✦ Mount the temperature station, page 8
✦ A note on securing cables, page 10
For Technical Support, please see “Contacting Davis Instruments” on page 10.
Wireless Temp Page 2 Thursday, December 7, 2000 2:09 PM