DAVIS Integrated Pest Management Module Getting Started Guide User Manual
Getting started guide, Integrated pest management module
Davis Instruments, 3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A. • 510-732-9229 • www.davisnet.com
®
Integrated Pest Management
Module
Getting Started Guide
The Integrated Pest Management Module is an optional module that
can be added on to an existing WeatherLink
®
installation. It is
compatible with all versions of WeatherLink 5.6 or later on
computers running Windows XP SP3 or later.
Before installing this software, make sure WeatherLink has been
installed on your computer. See the WeatherLink Getting Started
Guide for instructions.
Close WeatherLink before installing the Pest Management Module.
Install the Software
Note: If this is not your first install, skip to Step 4.
1. Place the Integrated Pest Management Module software CD in your
CD ROM drive. The install program should start automatically. If the
install program does not start, select Run from the Start menu, type
D:\SETUP (or the correct letter for your CD ROM drive), and click
OK to begin the installation.
Key Code: Keep in a safe place.