DAVIS Mounting Pole Kit Installation - Manual (Page 4)

Product Number: #7717
Davis Instruments Part Number: 7395.298
Rain Collector Heater Installation Manual
Rev. C (12/10/08)
This product complies with the essential protection requirements of the EC EMC Directive 2004/108/EC.
© Davis Instruments Corp. 2008. All rights reserved.
3465 Diablo Avenue, Hayward, CA 94545-2778 U.S.A.
510-732-9229 • Fax: 510-732-9188
E-mail: [email protected] • www.davisnet.com
The tube should be fastened as firmly as possible so that the tube and
station won’t wobble or tilt, causing the station to create and log erroneous
data.
Note: Do not use over 25 lb-ft torque wrench, it may damage the U-bolts.
4. Use the 8" cable ties to secure cable as needed.
Long Extension Tube
(secure in the tripod)
5/16"
Heavy
Duty
Hex Nuts
5/16" Lock
Washers
5/16" Flat
Washers
Saddle Tighten until
5/16" x 1-1/2" U-bolt
dents the tubing slightly
1 1/4"
Anemometer Extension Tube
(swaged end pointing
downward)
ISS