DAVIS GroWeatherLink/ET Data Logger - Manual (Page 2)

Product Numbers: 7871H
Davis Instruments Part Number: 7395-111
GroWeatherLink ET/Data Logger
Rev. A Manual (7/7/99)
This product complies with the essential protection requirements of the EC EMC
Directive 89/336/EC.
© Davis Instruments Corp. 1996. All rights reserved.
2. Remove the mounting base from the station and remove all power from the station by
removing the AC-power adapter and battery backup.
Failure to remove power to the weather station before installing the
WeatherLink may cause damage to the WeatherLink or station.
3. Insert the cable plug at the end of the short cable coming from the WeatherLink into
the jack marked C3 (To LINK) on the bottom of the console.
4. Restore power to the weather station by reattaching the power adapter and battery
backup.
The weather station should beep three times. The third beep, which should
occur within 30 seconds, indicates that the WeatherLink is operating correctly.
5. Place the WeatherLink inside the mounting base and reattach the mounting base.
I NSTALLATION OF W EATHER L INK